Electromechanical Hygrostat
Electromechanical Hygrostat
from £47.50
Electromechanical Hygrostat for humidity control in enclosures and electrical cabinets
Can work in either NC (Humidifying) or NO mode (Dehumidifying)
Voltage 24 - 230V
Los:
Quantity:
Electromechanical Hygrostat
The hygrostat is designed to control the relative humidity inside enclosures and electrical cabinets. It can be used to switch on a heater or dehumidifier at the humidity setpoint to increase the dew point within the cabinet. This prevents damage and malfunction of electronic components and metal parts caused by condensation and corrosion.
FEATURES
Can be operated in a voltage range of 24 - 230V AC
Setting range: 40 – 90% RH
Can work in either NC (Humidifying) or NO mode (Dehumidifying)
Easy mounting on a standard 35mm DIN rail (EN60715)
Technical data
| Electromechanical Hygrostat | FGHS100 |
|---|---|
| Function | Humidification or Dehumidication |
| Operating Voltage (Vac) | 24 to 230 |
| Setting Range (% RH) | 40 - 90 |
| Sensor | Plastic Fibers |
| Switching Current Dehumidification | min 100mA @ 24V (A) | 5 (0.2) |
| Switching Current Humidification | min 100mA @ 24V (A) | 2 (0.2) |
| Contact | 1 Change-over |
| Switching Differential (% RH) | approx. 5 |
| Protection Rating | IP 30 |
| Protection Class | 0 (Must be guaranteed by installation location) |
| Connection Type (awg) | Screw Terminals 20 - 14 |
| Operating/Storage Temperature (°F) | +32 to +140 |
| Weight (oz) | approx. 1.76 |
| Dimensions LxWxH (") | 1.69 x 1.45 x 2.52 |
